CST 65 Ton Ironworker

CST 65 Ton Ironworker

Power and versatility combined!

CST 65 Ton Ironworker

Powerful, non-stop metalworking action with 5 available work stations!

Comes equipped with punch station including a pedestal die table, angle shear, up to 24" flat bar shear, dedicated coper notcher and an open station. Choose from the multi-shear, angle notcher, 10" brake, rod shear, pipe notcher, or oversized punching attachment. Install the Hydraulic Manifold and maximize your shop capabilities by choosing the 10 Ton Pipe and Tube Bender, or one of our shop presses.

65 Ton Ironworker Specification Sheet

Technical Specifications:
Rated capacity 65 Ton 65,000 psi tensile strength
Number of work stations 5
Throat Depth 9-3/4"
Maximum Capacity 1-1/16" dia. thru 3/4" plate
Largest standard punch 1-1/16" punch
Open height 8-3/4"
Closed height 6-15/16"
Stroke 1-13/16"
Table Size 6" x 10"
Hydraulic System 7 gallon reservoir, 2-1/2" cylinder
Standard Motor 7.5 HP, 3 Phase, 208V or 230V - 22 amp
Optional Motor 7.5 HP, 3 Phase, 460V - 11 amp
Optional Motor 7.5 HP, 3 Phase, 575V - 8 amp
Optional Motor 5 HP, 1 Phase, 230V - 23 amp
Optional Motor 7.5 HP, 1 Phase, 230V - 36 amp
*required for Hydraulic Accessory Pack
Dimensions 62-1/8" W x 45" D x 57" H
Shipping Weight 4,750 lbs.


Download the technical manual

65-Ton-Manual-2017

Your 65 Ton Ironworker comes equipped with the following features:

  • Punch station with pedestal die table - uses 219 punch and 413 die
  • Fully guarded
  • Adjustable steel strippers
  • Fully charged hydraulic system
  • Electric stroke control
  • Shear blades reversible for extra long life
  • Low rake angle on shear blades
  • Remote foot pedal operation
  • Coper notcher standard in rear station
  • Direct drive pump

CST 65 Ton Ironworker

Image Part No. Description Availability Price Quantity Purchase
CST-IW65-3PH230 65 Ton 3 Phase 230V Call $19,699.00
CST-IW65-3PH208 65 Ton 3 Phase 208V Call $19,699.00
CST-IW65-3PH460V 65 Ton 3 Phase 460V Call $19,899.00
CST-IW65-3PH575V 65 Ton 3 Phase 575V Call $20,499.00
CST-IW65-1PH230V 65 Ton Single Phase 230V Call $20,099.00
Toolpack-1 14 sets 219 punch and 413 die from 1/4 - 1-1/16" in 1/16" increments in metal box Same day $290.00
Toolpack-2 8 sets 228 punch and 419 die sizes from 1-1/8" - 1-9/16" in 1/16" increments Same day $315.00
AC1024 65 ton Oversized Punch Assembly for 228 PCH 2014 and newer Same Day $719.00
AC1024-S3 65 ton Oversized Punch Assembly for 228 PCH 2013 and older Same Day $719.00
AC1055-2 65 ton Oversized Punch Assembly for 241 PCH 2014 and newer Same Day $1,499.00
AC1055-S3 65 ton Oversized Punch Assembly for 241 PCH 2013 and older Same Day $1,499.00
GRD484 Stripper for 219/228 punch assembly 2014 and newer Same Day $190.00
GRD5168-S Stripper for 219 punch assembly 2013 and older Same Day $190.00
GRD5168-4-S Stripper for Ton 228 Pch assembly 2013 and older Same Day $190.00
GRD643 Stripper for Ton 241 Pch assembly 2014 and newer Same Day $143.80
GRD1063-S Stripper for Ton 241 Pch assembly 2013 and older Same Day $190.00
T11204 Pedestal Die Table for 413 Die 2014 and newer Same Day $449.00
T11209 Pedestal Die Table for 419 Die 2014 and newer Same Day $494.35
T11201 Offset Pedestal Die Table for 413 Die 2013 and older Same Day $449.00
T11206 Offset Pedestal Die Table for 419 Die 2013 and older Same Day $494.35
CNUT219 Coupling Nut for 219 PCH Same Day $58.35
CNUT228 Coupling Nut for 228 PCH Same Day $66.00
T10015 Punch Stem for 219 PCH Stud Only Same Day $142.00
T10115 Punch Stem for 228 PCH Study Only Same Day $165.00
PH100 Punch Stem, Stud and Coupling Nut for 219 PCH Same Day $510.70
PH200 Punch Stem, Stud and Coupling Nut for 228 PCH Same Day $666.25
BS300-BB 24" Flat Bar Shear Replacement Blades (2 req.) (price each) Same Day $449.50
T20105 Upper Angle Shear Blade for 2014 and newer (6" Cap) Same Day $340.05
T20106 Lower Angle Shear Blade for 2014 and newer (6" Cap) (2 req., price each) Same Day $133.05
T20103 Upper Angle Shear Blade for 2013 and older (5" Cap) Same Day $340.05
T20104 Lower Angle Shear Blade for 2013 and older (5" Cap) (2 req., price each) Same Day $133.05
AC1074 Rod Shear for 65 Ton Same Day $1,539.00
BS100-RS Rod Shear Replacement Blade Set for 65 Ton 2014 and newer Same Day $719.00
BSS100-RS Rod Shear Replacement Blade Set for 65 Ton 2013 or older Same Day $719.00
AC1075 Multi Shear for 65 Ton Same Day $1,109.00
BS100-MS Multi Shear Replacement Blade Set for 65 Ton Same Day $578.60
AC0125 Angle Notcher for 65 Ton Same Day $1,339.00
BS100-AN Angle Notcher Replacement Blade Set Same Day $941.20
AC1034 8" Press Brake for 65 Ton Same Day $959.00
AC1052 10" Press Brake for 65 Ton (for open station) Same Day $1,219.00
AC1053 10" Press Brake for 65 Ton (for punch station) Same Day $1,219.00
T40200 Pipe Notcher Housing for 65 Ton (Dies sold separately) Same Day $285.00
AC0925T Turret Pipe Notcher Housing (Dies sold separately) Same day $999.00
T30502 1/2" Pipe Notcher Die Same Day $445.00
T30503 3/4" Pipe Notcher Die Same Day $445.00
T30504 1" Pipe Notcher Die Same Day $445.00
T30505 1-1/4" Pipe Notcher Die Same Day $450.00
T30506 1-1/2" Pipe Notcher Die Same Day $450.00
T30507 2" Pipe Notcher Die Same Day $475.00
1000TUNEUP Pipe Notcher Tune up kit-2 washers, 4 bolts for tabs, 2 tabs, 1 set screw, 2 bolts, 2 springs Same Day $20.00
1000 Spring Pipe Notcher Spring (2 required) (price each) Same day $6.00
BS200-NB Coper Notcher Replacement Blade Set (all 65 ton models) Same Day $808.25
AC600 Factory Installed Optional Hydraulic Accessory Pack (1 Phase) Call $1,100.00
HAT001 Porta Power Unit 1PH 230V Same Day $3,999.00
HAT002 Porta Power Unit 3PH 230V Same Day $3,799.00
HAT004 Porta Power Unit 3PH 460V Same Day $3,799.00
HAT1000 10 Ton Pipe and Tube Bender (requires Porta Power or factory installed Hydraulic Accessory Pack) Call $1,999.00
HAT2000 20 Ton Shop Press (requires Porta Power or factory installed Hydraulic Accessory Pack) Call $1,999.00
HAT4000 40 Ton Shop Press (requires Porta Power or factory installed Hydraulic Accessory Pack) Call $4,299.00
HAT5000 Radius Roller (requires Porta Power or factory installed Hydraulic Accessory Pack) Call $6,999.00
HAT6000 Horizontal Press (requires Porta Power or factory installed Hydraulic Accessory Pack) Call $7,199.00
AC1000 Magnetic Accessory Light Kit Same Day $99.00
HF5043 Oil Filter - external spin on Same Day $24.00
HF5041 In-Tank Oil Filter Same Day $165.00
T70001 Brass Slides (req. 2 slide screws) Same Day $23.00
Slidescrew Slide Screws (2 req.) (price each) Same Day $0.50