CST 65 Ton Ironworker

Power and versatility combined!

Powerful, non-stop metalworking action with 5 available work stations!

Comes equipped with punch station including a pedestal die table, angle shear, up to 24" flat bar shear, dedicated coper notcher and an open station. Choose from the multi-shear, angle notcher, 10" brake, rod shear, pipe notcher, or oversized punching attachment. Install the Hydraulic Manifold and maximize your shop capabilities by choosing the 10 Ton Pipe and Tube Bender, or one of our shop presses.

65 Ton Ironworker Specification Sheet

Technical Specifications:

Rated capacity	65 Ton 65,000 psi tensile strength
Number of work stations	5
Throat Depth	9-3/4"
Maximum Capacity	1-1/16" dia. thru 3/4" plate
Largest standard punch	1-1/16" punch
Open height	8-3/4"
Closed height	6-15/16"
Stroke	1-13/16"
Table Size	6" x 10"
Hydraulic System	7 gallon reservoir, 2-1/2" cylinder
Standard Motor	7.5 HP, 3 Phase, 208V or 230V - 22 amp
Optional Motor	7.5 HP, 3 Phase, 460V - 11 amp
Optional Motor	7.5 HP, 3 Phase, 575V - 8 amp
Optional Motor	5 HP, 1 Phase, 230V - 23 amp
Optional Motor	7.5 HP, 1 Phase, 230V - 36 amp *required for Hydraulic Accessory Pack
Dimensions	62-1/8" W x 45" D x 57" H
Shipping Weight	4,750 lbs.

Download the technical manual

65-Ton-Manual-2017

Your 65 Ton Ironworker comes equipped with the following features:

Punch station with pedestal die table - uses 219 punch and 413 die
Fully guarded
Adjustable steel strippers
Fully charged hydraulic system
Electric stroke control

Shear blades reversible for extra long life
3 LED lights installed in shearing station
Low rake angle on shear blades
Remote foot pedal operation
Coper notcher standard in rear station

Direct drive pump

Standard Punch Station with Pedestal Die Table
219 punch and 413 die
Standard Angle Shear

Angle Shear: 5" x 5" x 3/8" mild steel
Standard Flat Bar Shear

Flat Bar Shear:

3/8" x 24"

1/2" x 14"

1" x 4"

mild steel
Standard Coper Notcher

2-1/2" x 5" x 3/8" mild steel
Toolpack-1

14 sets of 219 punches and 413 dies sizes from 1/4" through

1-1/16" in 1/16 increments.

Packed in a metal container.
Toolpack-2

8 sets of 228 punches and 419 dies sizes

1-1/8" through 1-9/16"

in 1/16" increments.

Used on 228/419 oversized attachment only.
Optional Oversize Punching attachment

228 Punch and 419 Die: Punches sizes up to 1-1/2" round through 1/2" thick mild steel - 241 Punch 28XX Die (shown) Punches sizes up to 3-1/2" round through 3/16" mild steel
Magnetic Accessory Light

Provides 100,000 hours of LED light. Attaches to any Ironworker surface.

Machine comes with 3 LED lights installed in shearing station.
Optional Rod Shear

Shears 1/4 , 3/8 , 1/2 , 5/8 , 3/4 , 1" mild steel
Optional Multi-Shear

Flat Bar Shear: 1/4" x 6" mild steel - Angle Shear: 2" x 2" x 1/4" mild steel - Rod Shear: 1/4", 3/8", 1/2", 5/8", 3/4" mild steel - Square rod 13/16"
Optional Press Brake

8" or 10" Wide, 1/4" thick mild steel
Optional Pipe Notcher

Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"

Schedule 40 Pipe
Optional Turret Pipe Notcher Housing

Load 3 different pipe notcher dies at once and quickly switch from one size to the next.

Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
Pipe Notcher Dies

Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
Optional Angle Notcher

3" x 3" x 1/4" mild steel
Auto Cut

Adjustable proximity switch automates production when cutting repeatable lengths.
Factory Installed Optional Hydraulic Accessory Pack

3-Way switch and quick disconnect. Accepts optional Pipe/Tube Bender, 20 or 40 Ton Shop Press.

Must be factory installed
Optional Pipe and Tube Bender

2" (ID Schedule 40 Pipe Capacity - 2-1/2" (OD) .095" Tube Capacity - 2-1/4" .083 Chromoly Capacity

Requires Hydraulic Accessory Pack
20 Ton Shop Press

10-1/2" x 20" working area

6-1/4" stroke

37"h x 27"w x 24"d footprint

Requires Hydraulic Accessory Pack
40 Ton Shop Press

38" x 40-1/2" working area

12-1/4" stroke

79"h x 48"w x 48"d footprint

Requires Hydraulic Accessory Pack
Horizontal Press

Accepts a great variety of tooling to form, brake and straighten mild steel.

Requires Hydraulic Accessory Pack
Radius Roller

Designed for medium to heavy material. Powers through your job quickly and accurately.

Requires Hydraulic Accessory Pack

CST 65 Ton Ironworker

Part No.	Description	Availability	Price
CST-IW65-3PH208	65 Ton 3 Phase 208V	Call	$19,799.00
CST-IW65-3PH208-AC600	65 Ton 3 Phase 208V with Hydraulic Accessory Control Panel	Call	$21,099.00
CST-IW65-3PH230	65 Ton 3 Phase 230V	Call	$19,799.00
CST-IW65-3PH230-AC600	65 Ton 3 Phase 230V with Hydraulic Accessory Control Panel	Call	$21,099.00
CST-IW65-3PH380	65 Ton 3 Phase 380V	Call	$20,199.00
CST-IW65-3PH380-AC600	65 Ton 3 Phase 380V with Hydraulic Accessory Control Panel	Call	$21,499.00
CST-IW65-3PH460	65 Ton 3 Phase 460V	Call	$20,099.00
CST-IW65-3PH460-AC600	65 Ton 3 Phase 460V with Hydraulic Accessory Control Panel	Call	$21,399.00
CST-IW65-3PH575	65 Ton 3 Phase 575V	Call	$20,499.00
CST-IW65-3PH575-AC600	65 Ton 3 Phase 575V with Hydraulic Accessory Control Panel	Call	$21,799.00
CST-IW65-1PH230	65 Ton Single Phase 230V	Call	$20,099.00
CST-IW65-1PH230-AC700	65 Ton Single Phase 230V with Hydraulic Accessory Control Panel	Call	$21,399.00