 |
65
TON IRONWORKER
|
|
 | ||
 
|
STANDARD
FEATURES
|
||||||||||||||||
| •
Complete Punching System • #219 Punch and #413 Die • Open Cavity for Bump Die Tooling Plate • 24" Flat Bar Shear Blades Installed • Angle Shear Blades Installed • Coper/Notcher Blades Installed • Shear Blades Reversible for Extra Long Life • Low Rake Angle on Shear Blades • Fast Adjusting Hold Down Bars |
• Low Rake Angle on Shear Blades • Fully Guarded • Remote Foot Pedal Operations • Punch Strippers • Direct Drive Pump • Integral Lifting Lug for Instant Portability • Hydraulic System Charged and Ready to operate • Coupling Wrench • Comfortable Operating Height |
||||||||||||||||
|
STANDARD
ATTACHMENT
|
|||||||||||||||||
 |
 |
COPER
NOTCHER Maximum size: 2-1/2" x 6" x 3/8" mild steel |
|||||||||||||||
|
OPTIONAL
ATTACHMENTS FOR PUNCHING STATION
|
|||||||||||||||||
 |
 |
OVERSIZE
PUNCHING #228 Punch - #419 Die Maximum size: 1-1/2" round thru 1/2" thick mild steel #241 Punch - 28XX Die Maximum size 3-1/2" round thru 3/16" mild steel |
|||||||||||||||
 |
 |
ANGLE NOTCHER Maximum size:: 3" x 3" x 1/4" mild steel |
|||||||||||||||
|
SPECIFICATIONS
|
OPTIONAL
ATTACHMENT FOR
PUNCHING STATION AND POWER CAVITY |
||||||||||||||||
| PUNCHING
(2 STATIONS) Rated capacity Number of workstations Throat depth Maximum capacity Largest standard punch & die Open height Shut height Stroke Table size |
65 Ton 4 9-3/4" 1-1/16" dia. thru 3/4" plate 1-1/16" punch, 1-1/4" die 8-1/8" 6-3/4" 1-3/8" 6" x 10" |
||||||||||||||||
 |
 |
BRAKE 10" wide, 1/4" mild steel |
|||||||||||||||
|
|||||||||||||||||
| BAR
SHEAR Rounds/squares Flat maximum thickness Flat maximum width |
1-1/8" 3/4" x 4" 3/8" x 24" |
||||||||||||||||
| ANGLE
SHEAR Maximum size |
4" x 4" x 3/8" 5" x 5" x 1/4" |
||||||||||||||||
| CYCLE TIME |
1/2" X 2" shear, 2 seconds |
||||||||||||||||
|
HYDRAULIC SYSTEM OPTIONAL MOTORS |
Reservoir:
17 gallons 2,800PSI, cylinder; 3-1/2" ram 7.5 HP, 3 phase 208/240V - 21 amp 7.5 HP, 3 phase 440V - 13 amp 5 HP, 1 phase, 208/240V - 26 amp |
||||||||||||||||
| DIMENSIONS Base Height Weight |
42" x 43" 59" 4,220 lbs. |
||||||||||||||||
All specifications are subject to change without notice |
|||||||||||||||||
    Home | Tooling | Ironworkers | Portables | Cutters | Tech Notes | Contact Us Terms of Use The Cleveland Steel Tool Company 474 E. 105th Street • Cleveland, OH 44108-1378 USA Phone:216-681-7400
• Toll-free:800-446-4402
• Fax:216-681-7009 © Copyright 2002-2008, The Cleveland Steel Tool Company. All rights reserved. |